Astral Paints
Astral Gemcap Surface Tolerant Epoxy Coating
விலை கேளுங்க
இது திட்ட அளவில் கிடங்கிலிருந்து நேரடியாக தளத்துக்கு வரும். தேவையான அளவு, இடம், காலக்கட்டம் கொடுத்தால் GST விலைப்பட்டியல் அனுப்புவோம்.
- ஃபினிஷ்
- Semi-Gloss
- கவரேஜ்
- 65 to 105 sq.ft per litre per coat
மொத்த விற்பனை விலை
Rate on request. Share the required pack size, quantity, shade and delivery district for a current GST quotation.
மாநிலம் முழுவதும் மொத்த சப்ளை எப்படி நடக்கும்Salt air along the Ramanathapuram, Tuticorin and Chennai coast attacks steel fast, and full blasting is not always possible. Astral Gemcap is a self-priming, surface tolerant two-pack epoxy that goes over hand- or power-tool cleaned steel, encapsulates rust and builds a thick protective film. Pick it up in Light or Dark Grey from QUALITY COLOURS, Ramanathapuram.
குவாலிட்டி கலர்ஸ்-ன் தொழிற்சாலை பூச்சுகள் வரிசையில் இந்தப் பொருள் இடம்பெற்றிருக்கிறது. Astral Paints பொருட்களுக்கு ராமநாதபுரம் மாவட்டம் முழுவதும் நாங்கள் அங்கீகரிக்கப்பட்ட டீலர்; தமிழ்நாட்டின் எல்லா மாவட்டங்களுக்கும் மொத்த விற்பனையாகவும் சப்ளை செய்கிறோம். ஒவ்வொரு பேக்கும் 100% ஒரிஜினல்.
கம்ப்யூட்டர் கலர் மிக்ஸிங் மெஷினில் நேரடி ஷேட் டெமோ பார்க்க எங்கள் 5 கிளைகளில் எதற்கும் வாருங்கள். உங்கள் வேலைக்குச் சரியான பொருளையும் ஷேடையும் தேர்ந்தெடுக்க அனுபவமுள்ள ஊழியர்கள் உதவுவார்கள்.
தொழில்நுட்ப விவரங்கள் · Technical data
- Product type
- Two-pack surface tolerant epoxy coating, high solids
- Mixing ratio (Base : Hardener)
- 4 : 1
- Coverage
- 65 to 105 sq.ft per litre per coat
- Thinner
- Gemguard Epoxy Thinner
- Dilution
- 5 to 20%
- Shades
- Light Grey, Dark Grey
- Primer
- Self-priming
- Variants
- Light Grey, Dark Grey
- Pack sizes
- 20 L, 4 L, 1 L
- Surface preparation & application
- Recommended over hand- and power-tool cleaned steel; being self-priming, no separate primer is needed. Mix base and hardener 4:1; thin with Gemguard Epoxy Thinner 5-20%. Surface must be clean and free from oil, dust and loose particles. Paint only on a dry surface, with the object's temperature well above the dew point, to avoid bubbles/pin holes. Avoid over-thick or over-thinned application, high heat/wind and cold surfaces - these cause orange peel, wrinkling and sagging.
- HSN code
- 3208
எங்கே பயன்படுத்தலாம்
HSN 3208
வாடிக்கையாளர் விமர்சனங்கள்
Astral Gemcap Surface Tolerant Epoxy Coating-க்கு முதல் விமர்சனத்தை நீங்களே எழுதுங்க. உங்கள் கருத்து மற்ற வாடிக்கையாளர்களுக்கு உதவும்.


