Astral Paints
Astral Gemcryl 2K PU Coating
விலை கேளுங்க
இது திட்ட அளவில் கிடங்கிலிருந்து நேரடியாக தளத்துக்கு வரும். தேவையான அளவு, இடம், காலக்கட்டம் கொடுத்தால் GST விலைப்பட்டியல் அனுப்புவோம்.
- கவரேஜ்
- 70 to 85 sq.ft per litre (2 coats)
மொத்த விற்பனை விலை
Rate on request. Share the required pack size, quantity, shade and delivery district for a current GST quotation.
மாநிலம் முழுவதும் மொத்த சப்ளை எப்படி நடக்கும்Strong sun and coastal weather fade ordinary finishes quickly. Astral Gemcryl 2K PU is a glossy polyurethane topcoat with good colour retention for exterior steel, machinery and concrete, with water and chemical resistance. QUALITY COLOURS in Ramanathapuram stocks 10:1, 6:1 and 4:1 variants for buyers across Madurai, Tuticorin and Chennai.
குவாலிட்டி கலர்ஸ்-ன் தொழிற்சாலை பூச்சுகள் வரிசையில் இந்தப் பொருள் இடம்பெற்றிருக்கிறது. Astral Paints பொருட்களுக்கு ராமநாதபுரம் மாவட்டம் முழுவதும் நாங்கள் அங்கீகரிக்கப்பட்ட டீலர்; தமிழ்நாட்டின் எல்லா மாவட்டங்களுக்கும் மொத்த விற்பனையாகவும் சப்ளை செய்கிறோம். ஒவ்வொரு பேக்கும் 100% ஒரிஜினல்.
கம்ப்யூட்டர் கலர் மிக்ஸிங் மெஷினில் நேரடி ஷேட் டெமோ பார்க்க எங்கள் 5 கிளைகளில் எதற்கும் வாருங்கள். உங்கள் வேலைக்குச் சரியான பொருளையும் ஷேடையும் தேர்ந்தெடுக்க அனுபவமுள்ள ஊழியர்கள் உதவுவார்கள்.
தொழில்நுட்ப விவரங்கள் · Technical data
- Product type
- Two-component aliphatic polyurethane topcoat, interior & exterior
- Mixing ratio (Base : Hardener)
- 4:1, 6:1 or 10:1 depending on variant
- Coverage
- 70 to 85 sq.ft per litre (2 coats)
- Thinner
- Gemcryl PU Thinner
- Dilution
- 0 to 10%
- Shades
- 16 direct shades & RAL shades
- Recoat time
- 6 to 8 hours
- Variants
- 10:1 - Special Dual Pack PU Finish, 6:1 - Aliphatic Semi-Glossy PU Finish, 4:1 - Aliphatic Dual Pack PU Finish
- Pack sizes
- 20 L, 4 L, 1 L
- Surface preparation & application
- Use over an Epoxy/PU primer as part of the recommended system (Gemcryl PU Primer is listed in the range). Mix base and hardener exactly at the ratio printed for your variant; thin with Gemcryl PU Thinner 0-10%. Surface must be clean and free from oil, dust and loose particles. Recommended system: primer coat (respective thinner, 10-20% dilution, recoat 6-8 h, 120-160 sq.ft/coat) -> Astral Gem Paints KPF Putty for cracks/dents (4-6 h, sand with 180 emery) -> primer again -> 2 top coats (0-20% dilution, recoat 6-8 h). A 3rd coat is optional for dark shades where 2 coats do not hide well. Paint only on a dry surface, with the object's temperature well above the dew point, to avoid bubbles/pin holes. Avoid over-thick or over-thinned application, high heat/wind and cold surfaces - these cause orange peel, wrinkling and sagging.
- HSN code
- 3208
எங்கே பயன்படுத்தலாம்
HSN 3208
வாடிக்கையாளர் விமர்சனங்கள்
Astral Gemcryl 2K PU Coating-க்கு முதல் விமர்சனத்தை நீங்களே எழுதுங்க. உங்கள் கருத்து மற்ற வாடிக்கையாளர்களுக்கு உதவும்.

