Astral Paints
Astral Gemguard 2K Epoxy Coating
விலை கேளுங்க
இது திட்ட அளவில் கிடங்கிலிருந்து நேரடியாக தளத்துக்கு வரும். தேவையான அளவு, இடம், காலக்கட்டம் கொடுத்தால் GST விலைப்பட்டியல் அனுப்புவோம்.
- ஃபினிஷ்
- Gloss
- கவரேஜ்
- 70 to 85 sq.ft per litre (2 coats)
மொத்த விற்பனை விலை
Rate on request. Share the required pack size, quantity, shade and delivery district for a current GST quotation.
மாநிலம் முழுவதும் மொத்த சப்ளை எப்படி நடக்கும்Looking for a tough epoxy topcoat for steel structures, pipelines or plant equipment in Tamil Nadu? Astral Gemguard 2K Epoxy is a glossy, polyamide-cured two-pack epoxy with good chemical and water resistance and outstanding corrosion protection. QUALITY COLOURS in Ramanathapuram stocks 20L, 4L and 1L packs and supplies industrial buyers across Madurai, Tuticorin and Chennai.
குவாலிட்டி கலர்ஸ்-ன் தொழிற்சாலை பூச்சுகள் வரிசையில் இந்தப் பொருள் இடம்பெற்றிருக்கிறது. Astral Paints பொருட்களுக்கு ராமநாதபுரம் மாவட்டம் முழுவதும் நாங்கள் அங்கீகரிக்கப்பட்ட டீலர்; தமிழ்நாட்டின் எல்லா மாவட்டங்களுக்கும் மொத்த விற்பனையாகவும் சப்ளை செய்கிறோம். ஒவ்வொரு பேக்கும் 100% ஒரிஜினல்.
கம்ப்யூட்டர் கலர் மிக்ஸிங் மெஷினில் நேரடி ஷேட் டெமோ பார்க்க எங்கள் 5 கிளைகளில் எதற்கும் வாருங்கள். உங்கள் வேலைக்குச் சரியான பொருளையும் ஷேடையும் தேர்ந்தெடுக்க அனுபவமுள்ள ஊழியர்கள் உதவுவார்கள்.
தொழில்நுட்ப விவரங்கள் · Technical data
- Product type
- Two-pack (2K) polyamide-cured epoxy topcoat
- Mixing ratio (Base : Hardener)
- 4 : 1
- Coverage
- 70 to 85 sq.ft per litre (2 coats)
- Thinner
- Gemguard Epoxy Thinner
- Dilution
- 0 to 10%
- Shades
- 31 direct shades & RAL shades
- Recoat time
- 6 to 8 hours
- Variants
- All Whites, Shade Group 1, Shade Group 2, Shade Group 3
- Pack sizes
- 20 L, 4 L, 1 L
- Surface preparation & application
- Mix base and hardener 4:1; thin with Gemguard Epoxy Thinner 0-10% only if needed. Surface must be clean and free from oil, dust and loose particles. Recommended system: primer coat (respective thinner, 10-20% dilution, recoat 6-8 h, 120-160 sq.ft/coat) -> Astral Gem Paints KPF Putty for cracks/dents (4-6 h, sand with 180 emery) -> primer again -> 2 top coats (0-20% dilution, recoat 6-8 h). A 3rd coat is optional for dark shades where 2 coats do not hide well. Paint only on a dry surface, with the object's temperature well above the dew point, to avoid bubbles/pin holes. Avoid over-thick or over-thinned application, high heat/wind and cold surfaces - these cause orange peel, wrinkling and sagging.
- HSN code
- 3208
எங்கே பயன்படுத்தலாம்
HSN 3208
வாடிக்கையாளர் விமர்சனங்கள்
Astral Gemguard 2K Epoxy Coating-க்கு முதல் விமர்சனத்தை நீங்களே எழுதுங்க. உங்கள் கருத்து மற்ற வாடிக்கையாளர்களுக்கு உதவும்.

