Shalimar
Shalimar Bipigard CTE UHBC Ultra High Build Coal Tar Epoxy
விலை கேளுங்க
இது திட்ட அளவில் கிடங்கிலிருந்து நேரடியாக தளத்துக்கு வரும். தேவையான அளவு, இடம், காலக்கட்டம் கொடுத்தால் GST விலைப்பட்டியல் அனுப்புவோம்.
- ஃபினிஷ்
- Semigloss
- கவரேஜ்
- 4.5 - 1.8Sq.m/ltr (theoretical, as per Shalimar data sheet)
மொத்த விற்பனை விலை
Rate on request. Share the required pack size, quantity, shade and delivery district for a current GST quotation.
மாநிலம் முழுவதும் மொத்த சப்ளை எப்படி நடக்கும்Planning a maintenance or new-build painting job in southern Tamil Nadu? Shalimar Bipigard CTE UHBC Ultra High Build Coal Tar Epoxy is a low VOC, two component coal tar epoxy paint polyamine cured providing Ultra high thickness in dry film once applied in single coat. Typical uses: Refineries & Petrochemical Units, Power Plants, Gas Plants, Fertilizer Plants, Chemical Plants, Pulp & Paper Mills, Internal & External pipe coating, submerged surfaces, crude & fuel oil tanks. Ballast water tanks, pipelines, splash zone areas, jetties etc. QUALITY COLOURS (Ramanathapuram, Tamil Nadu) handles enquiries for Bipigard CTE UHBC Ultra High Build Coal Tar Epoxy from industrial units, EPC contractors and maintenance painters, and supplies on order.
குவாலிட்டி கலர்ஸ்-ன் தொழிற்சாலை பூச்சுகள் வரிசையில் இந்தப் பொருள் இடம்பெற்றிருக்கிறது. Shalimar பொருட்களுக்கு ராமநாதபுரம் மாவட்டம் முழுவதும் நாங்கள் அங்கீகரிக்கப்பட்ட டீலர்; தமிழ்நாட்டின் எல்லா மாவட்டங்களுக்கும் மொத்த விற்பனையாகவும் சப்ளை செய்கிறோம். ஒவ்வொரு பேக்கும் 100% ஒரிஜினல்.
கம்ப்யூட்டர் கலர் மிக்ஸிங் மெஷினில் நேரடி ஷேட் டெமோ பார்க்க எங்கள் 5 கிளைகளில் எதற்கும் வாருங்கள். உங்கள் வேலைக்குச் சரியான பொருளையும் ஷேடையும் தேர்ந்தெடுக்க அனுபவமுள்ள ஊழியர்கள் உதவுவார்கள்.
தொழில்நுட்ப விவரங்கள் · Technical data
- Range
- Shalimar Tuffkote
- Product type
- Coal tar epoxy coating
- Colour
- Black
- Finish
- Semigloss
- Flash point
- Above 25°C
- Mixing ratio (by volume)
- Base :Accelerator 3 : 1
- Volume solids
- 90 ± 3 %
- Recommended dry film thickness (DFT)
- 200 - 500 microns
- Wet film thickness
- 222 - 556 microns
- Theoretical spreading rate
- 4.5 - 1.8Sq.m/ltr
- Drying time (30°C)
- Touch Dry 1-2 hours Handle Dry 2-3 hours Full cure 7 days
- Overcoating interval
- Minimum 8 hours Maximum 24 hours
- VOC
- 150 gm/ltr (EPA Method 24)
- Storage life
- 12 months minimum @ 30°C if stored in a dry sealed container at shaded condition away from heat source and ignition
- Dry heat resistance
- Up to 120°C (Intermittent)
- Pot life
- 3 - 4 hours
- Thinner
- Thinner 6756
- Pack sizes
- 20L, 800L
- Certifications / standards
- IS 14948
- Data sheet no.
- SPL/PMG/2019100097
- HSN code
- 3208
- GST
- 18%
எங்கே பயன்படுத்தலாம்
HSN 3208
வாடிக்கையாளர் விமர்சனங்கள்
Shalimar Bipigard CTE UHBC Ultra High Build Coal Tar Epoxy-க்கு முதல் விமர்சனத்தை நீங்களே எழுதுங்க. உங்கள் கருத்து மற்ற வாடிக்கையாளர்களுக்கு உதவும்.



