Shalimar
Shalimar Epicure 100 Epoxy Zinc Phosphate High Build Primer
விலை கேளுங்க
இது திட்ட அளவில் கிடங்கிலிருந்து நேரடியாக தளத்துக்கு வரும். தேவையான அளவு, இடம், காலக்கட்டம் கொடுத்தால் GST விலைப்பட்டியல் அனுப்புவோம்.
- ஃபினிஷ்
- Eggshell to semi glossy
- கவரேஜ்
- 6.4 - 4.4 Sq.m/ltr (theoretical, as per Shalimar data sheet)
மொத்த விற்பனை விலை
Rate on request. Share the required pack size, quantity, shade and delivery district for a current GST quotation.
மாநிலம் முழுவதும் மொத்த சப்ளை எப்படி நடக்கும்Looking for epoxy primer for industrial work in Tamil Nadu? Shalimar Epicure 100 Epoxy Zinc Phosphate High Build Primer is a two pack polyamidoamine cured epoxy high build primer with a high level of anti-corrosive Zinc phosphate pigment loading for excellent protection to steel in severely corrosive environment. Typical uses: Suitable as primer coat for heavy duty systems for Structural Steel, Pipelines, interior and exterior of storage tanks for Fertilizer plants, Refineries & Petrochemical units, Chemical units, Offshore Platforms, Power Plants etc. Need Epicure 100 Epoxy Zinc Phosphate High Build Primer for a plant shutdown or new fabrication in southern Tamil Nadu? QUALITY COLOURS, Ramanathapuram supplies it on order and can share the full Shalimar data sheet.
குவாலிட்டி கலர்ஸ்-ன் தொழிற்சாலை பூச்சுகள் வரிசையில் இந்தப் பொருள் இடம்பெற்றிருக்கிறது. Shalimar பொருட்களுக்கு ராமநாதபுரம் மாவட்டம் முழுவதும் நாங்கள் அங்கீகரிக்கப்பட்ட டீலர்; தமிழ்நாட்டின் எல்லா மாவட்டங்களுக்கும் மொத்த விற்பனையாகவும் சப்ளை செய்கிறோம். ஒவ்வொரு பேக்கும் 100% ஒரிஜினல்.
கம்ப்யூட்டர் கலர் மிக்ஸிங் மெஷினில் நேரடி ஷேட் டெமோ பார்க்க எங்கள் 5 கிளைகளில் எதற்கும் வாருங்கள். உங்கள் வேலைக்குச் சரியான பொருளையும் ஷேடையும் தேர்ந்தெடுக்க அனுபவமுள்ள ஊழியர்கள் உதவுவார்கள்.
தொழில்நுட்ப விவரங்கள் · Technical data
- Range
- Shalimar Tuffkote
- Product type
- Epoxy primer
- Colour
- Grey
- Finish
- Eggshell to semi glossy
- Flash point
- Above 23°C
- Mixing ratio (by volume)
- Base : Accelerator 4 : 1
- Volume solids
- 80 ± 3 %
- Recommended dry film thickness (DFT)
- 125 - 180 microns
- Wet film thickness
- 156 - 225 microns
- Theoretical spreading rate
- 6.4 - 4.4 Sq.m/ltr
- Drying time (30°C)
- Surface dry 1.5-2.0 hours Hard Dry 6 - 10 hours Full curing 7 days
- Overcoating interval
- Minimum 6 hours Maximum Indefinite
- VOC
- 170 gm/ltr (EPA Method 24)
- Storage life
- 12 months minimum @ 30°C if stored in a dry sealed container at shaded condition away from heat source and ignition.
- Dry heat resistance
- Up to 150°C (Intermittent)
- Pot life
- 1 - 1.5 hours
- Thinner
- Thinner 6756
- Application method
- Airless Spray/Air Spray/brush/Roller
- Pack sizes
- 20L
- Data sheet no.
- SPL/PMG/2019100072
- HSN code
- 3208
- GST
- 18%
எங்கே பயன்படுத்தலாம்
HSN 3208
வாடிக்கையாளர் விமர்சனங்கள்
Shalimar Epicure 100 Epoxy Zinc Phosphate High Build Primer-க்கு முதல் விமர்சனத்தை நீங்களே எழுதுங்க. உங்கள் கருத்து மற்ற வாடிக்கையாளர்களுக்கு உதவும்.



