Shalimar
Shalimar Epigard 4 Zinc Rich Epoxy Primer
விலை கேளுங்க
இது திட்ட அளவில் கிடங்கிலிருந்து நேரடியாக தளத்துக்கு வரும். தேவையான அளவு, இடம், காலக்கட்டம் கொடுத்தால் GST விலைப்பட்டியல் அனுப்புவோம்.
- ஃபினிஷ்
- Matt
- கவரேஜ்
- 7.40 - 4.93 Sq.m/ltr (theoretical, as per Shalimar data sheet)
மொத்த விற்பனை விலை
Rate on request. Share the required pack size, quantity, shade and delivery district for a current GST quotation.
மாநிலம் முழுவதும் மொத்த சப்ளை எப்படி நடக்கும்Planning a maintenance or new-build painting job in southern Tamil Nadu? Shalimar Epigard 4 Zinc Rich Epoxy Primer is a two pack polyamide cured epoxy primer containing metallic zinc pigment (more than 90% Zinc on pigmentation ).It is ideally suited as primer for high corrosive area when it is coated with suitable intermediate and topcoat. Typical uses: A superior Zinc Rich Primer for protection of Refineries, Power Plants, Petrochemical units, Gas Plants, Fertilizer Units, pen stock, sluice gates etc at highly aggressive corrosive area. QUALITY COLOURS, Ramanathapuram supplies Epigard 4 Zinc Rich Epoxy Primer on order to fabricators, plant maintenance teams and contractors across Tamil Nadu, including Rameswaram, Paramakudi, Madurai and Tuticorin.
குவாலிட்டி கலர்ஸ்-ன் தொழிற்சாலை பூச்சுகள் வரிசையில் இந்தப் பொருள் இடம்பெற்றிருக்கிறது. Shalimar பொருட்களுக்கு ராமநாதபுரம் மாவட்டம் முழுவதும் நாங்கள் அங்கீகரிக்கப்பட்ட டீலர்; தமிழ்நாட்டின் எல்லா மாவட்டங்களுக்கும் மொத்த விற்பனையாகவும் சப்ளை செய்கிறோம். ஒவ்வொரு பேக்கும் 100% ஒரிஜினல்.
கம்ப்யூட்டர் கலர் மிக்ஸிங் மெஷினில் நேரடி ஷேட் டெமோ பார்க்க எங்கள் 5 கிளைகளில் எதற்கும் வாருங்கள். உங்கள் வேலைக்குச் சரியான பொருளையும் ஷேடையும் தேர்ந்தெடுக்க அனுபவமுள்ள ஊழியர்கள் உதவுவார்கள்.
தொழில்நுட்ப விவரங்கள் · Technical data
- Range
- Shalimar Tuffkote
- Product type
- Zinc rich epoxy primer
- Colour
- Grey
- Finish
- Matt
- Flash point
- Above 23°C
- Mixing ratio (by volume)
- Base : Accelerator 3 : 1
- Volume solids
- 37 ± 3 %
- Recommended dry film thickness (DFT)
- 50 -75 microns
- Wet film thickness
- 135 - 202 microns
- Theoretical spreading rate
- 7.40 - 4.93 Sq.m/ltr
- Drying time (30°C)
- Touch dry 30 minutes Handleable 4 - 6 hours Full cure 7 days
- Overcoating interval
- Minimum 18 hours Maximum Indefinite
- VOC
- 535 gms/ltr (EPA Method 24)
- Dry heat resistance
- Up to 300°C (Intermittent)
- Pot life
- 3 - 5 hours
- Thinner
- Thinner 6756
- Application method
- Conventional spray / Airless spray Brush for small areas
- Pack sizes
- 20L
- Data sheet no.
- SPL/PMG/2019100054
- HSN code
- 3208
- GST
- 18%
எங்கே பயன்படுத்தலாம்
HSN 3208
வாடிக்கையாளர் விமர்சனங்கள்
Shalimar Epigard 4 Zinc Rich Epoxy Primer-க்கு முதல் விமர்சனத்தை நீங்களே எழுதுங்க. உங்கள் கருத்து மற்ற வாடிக்கையாளர்களுக்கு உதவும்.



