Shalimar
Shalimar Epigard TL HB Epoxy Intermediate
விலை கேளுங்க
இது திட்ட அளவில் கிடங்கிலிருந்து நேரடியாக தளத்துக்கு வரும். தேவையான அளவு, இடம், காலக்கட்டம் கொடுத்தால் GST விலைப்பட்டியல் அனுப்புவோம்.
- ஃபினிஷ்
- Eggshell to Semi gloss
- கவரேஜ்
- 6.0 - 4.8 Sq.m/ltr (theoretical, as per Shalimar data sheet)
மொத்த விற்பனை விலை
Rate on request. Share the required pack size, quantity, shade and delivery district for a current GST quotation.
மாநிலம் முழுவதும் மொத்த சப்ளை எப்படி நடக்கும்Need a dependable epoxy intermediate / tie coat for coastal Tamil Nadu? Shalimar Epigard TL HB Epoxy Intermediate is a two pack amine-adduct cured high build epoxy coating specially formulated as high performance intermediate coat for medium to highly aggressive structural steel. Typical uses: As tank lining for MS storage tanks in refineries, petrochemical units, fertilizer plants, oil installations, etc. Project buyers in Madurai, Sivaganga, Virudhunagar, Tuticorin and Ramanathapuram can source Epigard TL HB Epoxy Intermediate through QUALITY COLOURS, which supplies it on order with the Shalimar data sheet.
குவாலிட்டி கலர்ஸ்-ன் தொழிற்சாலை பூச்சுகள் வரிசையில் இந்தப் பொருள் இடம்பெற்றிருக்கிறது. Shalimar பொருட்களுக்கு ராமநாதபுரம் மாவட்டம் முழுவதும் நாங்கள் அங்கீகரிக்கப்பட்ட டீலர்; தமிழ்நாட்டின் எல்லா மாவட்டங்களுக்கும் மொத்த விற்பனையாகவும் சப்ளை செய்கிறோம். ஒவ்வொரு பேக்கும் 100% ஒரிஜினல்.
கம்ப்யூட்டர் கலர் மிக்ஸிங் மெஷினில் நேரடி ஷேட் டெமோ பார்க்க எங்கள் 5 கிளைகளில் எதற்கும் வாருங்கள். உங்கள் வேலைக்குச் சரியான பொருளையும் ஷேடையும் தேர்ந்தெடுக்க அனுபவமுள்ள ஊழியர்கள் உதவுவார்கள்.
தொழில்நுட்ப விவரங்கள் · Technical data
- Range
- Shalimar Tuffkote
- Product type
- Epoxy intermediate / tie coat
- Colour
- Selected Range
- Finish
- Eggshell to Semi gloss
- Flash point
- Above 23°C
- Mixing ratio (by volume)
- Base : Accelerator 4 : 1
- Volume solids
- 60±3%
- Recommended dry film thickness (DFT)
- 100 - 125 microns
- Wet film thickness
- 167 - 208 microns
- Theoretical spreading rate
- 6.0 - 4.8 Sq.m/ltr
- Drying time (30°C)
- Touch dry 2 - 4 hours Handle dry 10 - 12 hours Full cure 7 days
- Overcoating interval
- Minimum 18 hours Maximum 7 days
- VOC
- 350 gm/ltr (EPA Method 24)
- Storage life
- Up to 12 months so long as the material is stored in a sealed containers under standard warehouse storage conditions
- Dry heat resistance
- Up to 150°C (Intermittent)
- Pot life
- 1 to 1.5 hour
- Thinner
- Thinner 6756
- Application method
- Brush/ Airless spray/Air Spray
- Pack sizes
- 20L
- Data sheet no.
- SPL/PMG/20191000151
- HSN code
- 3208
- GST
- 18%
எங்கே பயன்படுத்தலாம்
HSN 3208
வாடிக்கையாளர் விமர்சனங்கள்
Shalimar Epigard TL HB Epoxy Intermediate-க்கு முதல் விமர்சனத்தை நீங்களே எழுதுங்க. உங்கள் கருத்து மற்ற வாடிக்கையாளர்களுக்கு உதவும்.



