Shalimar
Shalimar Tuffkote ST HB Synthetic Enamel
விலை கேளுங்க
இது திட்ட அளவில் கிடங்கிலிருந்து நேரடியாக தளத்துக்கு வரும். தேவையான அளவு, இடம், காலக்கட்டம் கொடுத்தால் GST விலைப்பட்டியல் அனுப்புவோம்.
- ஃபினிஷ்
- High Glossy
- கவரேஜ்
- 10.00 - 8.33 Sq.metre/litre (theoretical, as per Shalimar data sheet)
மொத்த விற்பனை விலை
Rate on request. Share the required pack size, quantity, shade and delivery district for a current GST quotation.
மாநிலம் முழுவதும் மொத்த சப்ளை எப்படி நடக்கும்Searching for Shalimar Tuffkote ST HB Synthetic Enamel near Ramanathapuram? Shalimar Tuffkote ST HB Synthetic Enamel: It is an industrial single pack alkyd based synthetic enamel. Typical uses: Maintenance painting for Drilling Rigs and Platforms Fertilizer Plants, Chemical Factories, Refineries, Petrochemical units, Railway Bridges, Marine & Port Installations. Steel and concrete in Tamil Nadu's salt-laden coastal belt, from Rameswaram to Tuticorin, corrode fast; QUALITY COLOURS in Ramanathapuram supplies Tuffkote ST HB Synthetic Enamel for such jobs on order.
குவாலிட்டி கலர்ஸ்-ன் தொழிற்சாலை பூச்சுகள் வரிசையில் இந்தப் பொருள் இடம்பெற்றிருக்கிறது. Shalimar பொருட்களுக்கு ராமநாதபுரம் மாவட்டம் முழுவதும் நாங்கள் அங்கீகரிக்கப்பட்ட டீலர்; தமிழ்நாட்டின் எல்லா மாவட்டங்களுக்கும் மொத்த விற்பனையாகவும் சப்ளை செய்கிறோம். ஒவ்வொரு பேக்கும் 100% ஒரிஜினல்.
கம்ப்யூட்டர் கலர் மிக்ஸிங் மெஷினில் நேரடி ஷேட் டெமோ பார்க்க எங்கள் 5 கிளைகளில் எதற்கும் வாருங்கள். உங்கள் வேலைக்குச் சரியான பொருளையும் ஷேடையும் தேர்ந்தெடுக்க அனுபவமுள்ள ஊழியர்கள் உதவுவார்கள்.
தொழில்நுட்ப விவரங்கள் · Technical data
- Range
- Shalimar Tuffkote
- Product type
- Primer-cum-finish synthetic enamel
- Colour
- Selected Range
- Finish
- High Glossy
- Flash point
- Above 30°C
- Volume solids
- 50 ± 2 %
- Recommended dry film thickness (DFT)
- 50 - 60 microns
- Wet film thickness
- 100 - 120 microns
- Theoretical spreading rate
- 10.00 - 8.33 Sq.metre/litre
- Drying time (30°C)
- Surface Dry 2 Hours Hard Dry 8 -12 Hours
- Overcoating interval
- Minimum 12 Hours Maximum Depends on conditions
- Storage life
- Upto 12 months so long as the material is stored in sealed containers under standard conditions. warehouse storage
- Dry heat resistance
- Up to 120°C (Intermittent) In common with all epoxies, this
- VOC
- 410 grams/litre
- Thinner
- Tuffkote SPL Thinner
- Application method
- Brush / Airless Spray. Airless spray recommended for uniform and high film build
- Pack sizes
- 20L
- Data sheet no.
- SPL/PMG/2019100170
- HSN code
- 3208
- GST
- 18%
எங்கே பயன்படுத்தலாம்
HSN 3208
வாடிக்கையாளர் விமர்சனங்கள்
Shalimar Tuffkote ST HB Synthetic Enamel-க்கு முதல் விமர்சனத்தை நீங்களே எழுதுங்க. உங்கள் கருத்து மற்ற வாடிக்கையாளர்களுக்கு உதவும்.



